NETWORK BASED APPLICATION RECOGNITION ppt download

Protocol Discoveryの統計情報のレポートは、以下のコマンドによって確認することができます。 ⇒ show policy-map interface interface-id ⇒ show ip nbar protocol-discovery interface interface-id NBAR - コンフィグ設定（分類の設定） NBARを利用するためには「ip cef」を有効化させる必要.. To display the gathered statistics, use the "show ip nbar protocol-discovery" command. To enable NBAR do the following: enable CEF, create a class-map to classify the protocol or application, create a policy-map for the class and attach the policy to an interface (service-policy command). Check out this link: (watch the wrap)

The ip nbar protocol-discovery command is used to enable Protocol Discovery on an interface. With Cisco IOS Release 12.2(18)ZYA, intended for use on the Cisco 6500 series switch that is equipped with a Supervisor 32/PISA, the ip nbar protocol-discovery command is supported on both Layer 2 and Layer 3 Etherchannels.. Name ip nbar protocol-discovery — interface Synopsis ip nbar protocol-discovery no ip nbar protocol-discovery Configures Network-Based Application Recognition (NBAR) Default None Description This command enables traffic statistics for an interface. - Selection from Cisco IOS in a Nutshell, 2nd Edition [Book]