Bluetooth Pairing with a Sena Headset or Helmet Juan - Sena Support . March 20, 2019 23:18 Updated. 1. Turn on the +mesh and a headset that you would like to pair with each other. 2. Press and hold the Multi-function Button of the +mesh for 5 seconds until red LED of the +mesh start to flash rapidly.. You will hear a voice prompt saying "Phone pairing". 3. Search for Bluetooth devices on your mobile phone. Select the Sena SRL in the list of the devices detected on the mobile phone. 4. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN. 5. The mobile phone confirms that pairing has been completed and the SRL is ready to use.
Up to three people can communicate via intercom with the Cavalry Bluetooth Helmet simply by pairing their headsets. 1. Press and hold the Center Buttons of two Bluetooth Modules for 5 seconds until you hear the voice prompt, "Intercom pairing." 2. Tap the Center Button on either Bluetooth Module and wait until the LEDs of both turn blue. 3.. ON YOUR HELMET 10 2.1 Preparing the Helmet for Installation 10. 3. GETTING STARTED 16 3.1 Downloadable Sena Software 16 3.1.1 ena Motorcycles App S 16 3.1.2 Sena Device Manager 16 3.2 harging C 16 3.3 Legend 17 3.4 Powering On and Off 17 3.5 Checking the Battery Level 17 3.6 Volume Adjustment 18 4. PAIRING THE HEADSET WITH OTHER BLUETOOTH.