Threading Kenmore 158.121180 Vintage Sewing Machine

Threading a Kenmore sewing machine model 385 is a simple process that can be done in a few easy steps. Step 1: Start by raising the presser foot and turning the handwheel towards you to raise the needle to its highest position. Step 2: Take the thread and place it on the spool pin, then secure it with the spool cap. Step 3: Guide the thread through the thread guide, tension discs, and take-up.. Properly threading your Kenmore 385 sewing machine is necessary for successful sewing. Without the correct threading, the machine will not sew correctly and could possibly break. The 25 models in the 385 line of Kenmore machines are made similarly so the threading of the machines will also be similar.

If you need to thread a Kenmore sewing machine, turn the clutch knob counter-clockwise to release it, then place your spool of thread on the spool pin. Pull thread from the spool and fit it into the small tension disc, then pull the thread through the hole of the bobbin. Once you've done that, push the bobbin to the right until it clicks.. Basically, I've divided the whole process of threading a Kenmore sewing machine into four parts. So, let's start threading a Kenmore! Part One: Wind the Bobbin. As the first step, you've to release the clutch knob. You'll find it on the right side of the machine.